Carbide Inserts & Grades

You are here:

Home
Sandvik Coromant
Carbide Inserts and Grades

Turning Inserts and Grades Based on Material

Turning inserts and grades for steel
Optimized CVD- and PVD-coated carbide grades and cermets for steel machining.

turning inserts grades stainless steel thumb

Turning inserts and grades for stainless steel
The latest CVD- and PVD-coated carbide grades for all stainless steel operations.

Turning inserts and grades for cast iron
Wide range of CVD- and PVD-coated and uncoated, CBN, and ceramic grades optimized for cast iron machining.

turning inserts grades non ferrous materials thumb

Turning inserts and grades for non-ferrous materials
Uncoated carbide grade and PCD for aluminum and other non-ferrous materials.

turning inserts grades titanium hrsa thumb

Turning inserts and grades for titanium and HRSA
CVD- and PVD-coated carbide grades and ceramics for heat-resistant super alloys and titanium.

turning inserts grades hardened steel thumb

Turning inserts and grades for hardened steel
CBN and ceramic grades optimized for hard part turning.

Parting and Grooving Inserts and Grades

GC1105
Ideal grade for parting and grooving HRSA, titanium, and duplex stainless steels under good conditions. Requires stability, such as sub-chuck and feed reduction at center.

GC1145
The safest grade choice for parting-off in fair to unstable conditions at low speeds. Works well when combined with High Precision Coolant (HPC) at medium speeds (reduced temperature).

GC2135
CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts. Low to medium cutting speeds.

GC1135
CVD-coated grade for tough and demanding operations such as parting-off to center and interrupted cuts. Low to medium cutting speeds.

GC1125
PVD-coated grade is a First Choice for parting-off in stable conditions. Speeds and feeds from low to medium.

GC4325
For long tool life in grooving applications in steel and cast iron. Suitable for parting-off in stable conditions, especially in machines with oil coolant.

CB7015
Cubic boron nitride (CBN) composite grade for hardened ferrous materials and HRSA. Suitable for both continuous and interrupted cuts.

Threading Inserts and Grades

GC1125
PVD TiCrAlN grade for ISO P, M, K, and N materials. Combines the superior wear resistance of a coated grade with the edge sharpness and toughness of an uncoated grade. Optimized for steel threading and for medium to high speeds.

GC1105
A PVD-coated carbide grade with high hot hardness and a good combination with the sharpest cutting edges. Specially suited for low carbon, stainless steel, and heat-resistant super alloys.

CB7015
Brazed CBN-tippped inserts ideal for threading hardened components. Can be applied in the hardness range HRc 55–62 and for finishing at limited cutting depths and eliminates the need for grinding operations.

GC1135
PVD TiCrAlN grade for ISO M, S, P, and K materials, optimized for stainless steel and heat-resistant super alloys. The best choice for sharp profiles in all materials and for low to medium speeds.

GC1025
A PVD-coated all-round grade for toughness demanding operations. Recommended for small part machining at low cutting speed.

Milling Inserts and Grades

Milling inserts and grades based on material

Milling inserts and grades for steel
Find your CVD- and PVD-coated carbide grades and uncoated cermets optimized for steel.

milling inserts grades stainless steel thumb

Milling inserts and grades for stainless steel
Find the right CVD- and PVD-coated carbide grades or cermets for your operations.

Milling inserts and grades for cast iron
CVD- and PVD-coated and uncoated carbides and CBN-tipped and ceramic insert grades optimized for cast iron.

milling inserts grades non ferrous materials thumb

Milling inserts and grades for non-ferrous materials
PCD-tipped, cermets, uncoated and PVD-coated carbide grades for manufacturing of non-ferrous materials.

milling inserts grades titanium hrsa thumb

Milling inserts and grades for titanium and HRSA
CVD- and PVD-coated and uncoated carbide insert grades for milling titanium and HRSAs.

milling inserts grades hardened steel thumb

Milling inserts and grades for hardened steel
CVD and PVD carbide grades along with CBN-tipped grades, cermets, and ceramics designed for hard part milling.

Drilling Inserts and Grades

short hole drilling inserts grades thumb

Short hole drilling inserts and grades
Peripheral and central insert grades as well as exchangeable tips for excellent hole quality in short hole drilling.

Deep hole drilling inserts and grades
CVD- and PVD-coated insert grades designed for the precise hole tolerances of deep hole drilling.

Boring Inserts and Grades

Turning Inserts and Grades for Steel
Optimized CVD- and PVD-coated carbide grades and cermets for steel machining.

turning inserts grades stainless steel thumb 1

Turning Inserts and Grades for Stainless Steel
The latest CVD- and PVD-coated carbide grades for all stainless steel operations.

turning inserts grades cast iron thumb 1

Turning Inserts and Grades for Cast Iron
Wide range of CVD- and PVD-coated and uncoated, CBN, and ceramic grades optimized for cast iron machining.

turning inserts grades non ferrous materials thumb 1

Turning Inserts and Grades for Non-ferrous Materials
Uncoated carbide grade and PCD for aluminum and other non-ferrous materials.

turning inserts grades titanium hrsa thumb 1

Turning Inserts and Grades for Titanium and HRSA
CVD- and PVD-coated carbide grades and ceramics for heat-resistant super alloys and titanium.

turning inserts grades hardened steel thumb 1

Turning Inserts and Grades for Hardened Steel
CBN and ceramic grades optimized for hard part turning.